Akcp sensor probe 2 manual

2. After you pressed the “Scan from USB” button, this completed the proper addition of the new BOS with all correct data (this option is available only on image # and newer). Note: on older L-DCIM image versions, you could only add a BOS by manually entering the required sensor access key details from the sticker on the sensor. www.doorway.ru Virtual Sensors Introduction: use of this could be to use the securityProbe as a probe manager. If you had a securityProbe and from a sensorProbe 2 device with a temp sensor on port 1 then you would use the following OID Check manual page of akcp_sensor_temp. This check monitors the temperature of sensors attached to AKCP SensorProbe. The check has configureable default levels for WARN / CRIT (default: 32, 35). The service goes WARN if the warning level is passed. The service goes CRIT. - if the critical level is passed. - the sensor state is "no status".

AKCP PMS (Power Monitor Sensor) As noted above in item #2 the AKCP PMS can be used without any license. The AKCP PMS is setup using the Modbus Device setup and NOT using the virtual sensors. Again, please refer to the steps beginning on page #24 for the setup of the AKCP PMS. (excluding our daisyTemp, 8 port sensor controlled relay, thermocouple or PMS sensors), or you can add dry contact connection for monitoring UPS, security systems and air conditioning status. 2. What’s the difference between the SP2 and the SP8? The SP2 is a small unit with facility for 2 RJ45 sensor inputs. The SP8 is a larger unit with. The sensorProbe8-X60 comes with 8 autoSense Intelligent sensor ports, for connecting a wide range of our intelligent sensors. An additional 60x 2-wire dry contact ports are provided giving a total of up to 68 dry contact ports. The specially designed 2 wire dry contact ports are easy to use and allow you to make your own dry contact cables quickly.

Check manual page of akcp_sensor_humidity. AKCP sensorProbe: Humidity. Distribution, official part of Check_MK. License, GPL. Supported Agents, SNMP. Boitier SensorProbe AKCP: controle environnemental. Boitier SensorProbe8. La documentation PDF des matériels SensorProbe d'AKCP peut être téléchargée ici. sensorProbe2 has been field-proven with versatile measurement options. It can be configured to prevent specific kinds of exposure to humidity, water leakage.